How to Use Rapid Antigen Tests for COVID-19

Rapid Response COVID-19 Antigen Test

The information provided below is for informational purposes only. It is not professional medical advice, diagnosis, treatment or care, nor is it intended to be a substitute therefore. If you are a health care professional, then this information is shared with you on the express condition that you will use your own expertise and professional judgment in applying any information to a specific case. This is general information only, the validity of which may be affected by individual patient factors that are unknown to the author(s). It is the responsibility of those using this information to ensure appropriate interpretation and application is undertaken with regard to any specific clinical situation.

How to Use Rapid Antigen Tests for COVID-19

Rapid COVID tests are cost-effective and easy to administer. Follow these steps to learn how to use rapid rapid antigen tests for COVID-19. 

BTNX Rapid Response COVID-19 Antigen Rapid Test Device
Total Time Needed: 20 minutes
Total Cost: 13 CAD

Required Tools:

- A rapid antigen test kit
- Personal protective equipment (recommended)
- A watch or timer

Things Needed?

- A designated plastic zipper bag
- A garbage to safely dispose of the swab and test kit

Steps to use a rapid antigen test kit

Step 1: Remove packaging and prepare for testing
Put on your PPE and be sure to have ample space for the items in the test kit as you remove them from the packaging:
  • sterile swab
  • extraction buffer tube
  • test cassette reader
remove-packaging
Step 2: Collect the nasal sample
Insert the sterile swab into the nostril with the most secretion. While rotating the swab, insert the swab 2 cm (slightly less than 1 inch) parallel to the palate (not upwards) towards the throat into the nostril until resistance is met at turbinates. Do not apply pressure.

Rotate the swab 4 times for about 15 seconds against the nasal wall and remove it from the nostril.

Repeat with the same swab in the other nostril.

Note: Samples must be collected from both nostrils using the same swab.
nasal-swab-collection
Step 3: Add drops of buffer to tube
Depending on the make/model of rapid antigen test you're using, the buffer may already be in the tube. If it is, skip this and go to Step 4. If your tube is empty, add 10 drops of buffer liquid into the tube.
add-buffer-drops-rapid-test
Step 4: Insert swab into extraction buffer tube
Insert the swab into an extraction buffer tube. While squeezing the buffer tube, stir the swab more than 10 times.
sample-insert-rapid-test
Step 5: Remove the swab while squeezing
Remove the swab while squeezing the sides of the tube to extract the liquid from the swab. WARNING! Failure to squeeze the tube can lead to incorrect results due to excess buffer in the swab.
remove-swab-rapid-test
Step 6: Add the nozzle to the buffer tube
Depending on the test make/model, the nozzle may be a screw cap or need to be pushed to snap close.
add nozzle to buffer tube
Step 7: Apply sample drops from buffer tube to test cassette
Place the test device on a flat surface and apply 3-5 drops of the extracted sample at a 90º angle to the specimen well of the test device.
add sample drops to test cassette
Step 8: Wait 15 minutes
Wait 15-30 minutes and then read the test result at 15 to 30 min.
wait-to-read
Step 9: Read the test results
A colored line appears in the top section of the result window to show that the test is working properly. This is the control line (C). Even if the control line is faint, the test should be considered to have been performed properly. If no control line is visible the test is invalid.

In case of a positive result, a colored line appears in the lower section of the result window. This is the test line (T). Even if the test line is very faint or not uniform, the test result should be interpreted as a positive result.
Read Covid Test Results

Did You Test Positive for COVID-19?

If you tested positive for COVID-19 in Canada, you might be wondering what to do next? While they are similar, the guidelines do vary by province. Luckily, we’ve put a helpful guide together for you. Read what to do if you test positive for COVID-19.

Video Demo – How to Use Rapid Antigen Tests for COVID

In this video, Adam Singfield, Co-Founder of Rapid Test & Trace, demonstrates how to use a rapid antigen test during a live broadcast of CP24’s Morning Show.

Buy Rapid Tests for Your Home or Workplace

Order through our online rapid test store or contact our team for a quote today if you’re looking to buy rapid tests to in bulk to protect your workplace from the spread of COVID-19. 

  • Rapid Tests

    Rapid Response Strep A Test (20 pack)

    $3.49/test Buy Now
  • Rapid COVID-19 Tests

    Artron COVID-19 Rapid Test (25 pack)

    $5.00/testYou save $3.25 (39% Off) Buy Now
  • Sale! INSTI HIV Self Test
    Rapid Tests

    INSTI HIV Self Test

    $34.49/testYou save $5.50 (14% Off) Buy Now
  • Rapid COVID-19 Tests

    PCL Rapid Spit Test (2 Pack)

    $4.00/boxYou save $15.99 (80% Off) Buy Now

Recent Posts

Featured Products

  • COF-19CPC5--COV-FLU-3-in-1-TestBox-Right-(Transparent)
  • Sperm OK Male Fertility Test - Artron

Sign Up

New Newsletter Sign Up (#30)

Other Topics

Proudly trusted by hundreds of organizations across Canada​

Shopping Cart
Your Cart
Scroll to Top